Sold Out
Brand: PiBot
Model: PIEKL230N02
Video firmware is old, please check new!
What is it
A set of electronics kits for GRBL CNC.
Purpose of designed is easy to connected and used by Beginner, Developer, or Manufacturer.
Long cables with quick connector no need soliding.
With the multiple quick connector you can put t..
$111.45
Sold Out
Brand: PiBot
Model: PIEKR230N01
Video
What is it
A set of electronics kits for GRBL CNC.
Purpose of designed is easy to connected and used by Beginner, Developer, or Manufacturer.
Long cables with quick connector no need soliding.
With the multiple quick connector you can put the power cables of parallel conneti..
$164.99
Sold Out
Brand: PiBot
Model: PIEKR230N02
Video
What is it
A set of electronics kits for GRBL CNC.
Purpose of designed is easy to connected and used by Beginner, Developer, or Manufacturer.
Long cables with quick connector no need soliding.
With the multiple quick connector you can put the power cables of parallel conneti..
$164.99
Brand: PiBot
Model: PIIRB230B01
What is it
This is a simple way to add a relay to your micro controller or CNC controller. It runs off 5V or 3.3V and most controllers can easily drive it.
The circuit is optically isolated from the relay, so your controller is protected from voltage spikes and surges.
It does this by shining lig..
$9.99
Brand: PiBot
Model: PIISR200B01
Notice: Now The Products Have Upgrade to Rev2.3
Please go to the new version page - PiBot Isolated Relay Rev2.3 (3 Channels Compatible +5V or +3.3V Boards)
All Order will ship with Rev2.3
What is it
This is a simple way to add a relay to your micro controller or CNC controller. It runs off 5..
$9.99
Sold Out
Brand: PiBot
Model: PIEKD200N01
Notice: Now The Products Have Upgrade to Rev2.3
Please go to the new version page - A Set of PiBot Electronics Kits 2.3D for 3D Printer (Free Shipping)
All Order will ship with Rev2.3
Videos
What is it
A set of electronics kits for 3D Printer.
Purpose of designed is easy to..
$209.99
-33 %
Sold Out
Brand: PiBot
Model: PIEKD230N01
Videos(this video is old firmware, please check new)
What is it
A set of electronics kits for 3D Printer.
Purpose of designed is easy to connected and used by Beginner, Developer, or Manufacturer.
Long cables with quick connector no need soldering.
With the multiple quick connecto..
$139.99 $209.99
Sold Out
Brand: PiBot
Model: PIEKD230N02
Videos firmware is old, please check new
What is it
A set of electronics kits for 3D Printer.
Purpose of designed is easy to connected and used by Beginner, Developer, or Manufacturer.
Long cables with quick connector no need soldering.
With the multiple quick connector you can ..
$140.33
Brand: PiBot
Model: PICOB200B01
Notice: Now The Products Have Upgrade to Rev2.3
Please go to the new version page - PiBot Controller Board Rev2.3 (3D Printer CNC Laser Engraver Robot Control 4 in 1)
All Order will ship with Rev2.3
Video1 Used for CNC
Video2 Used for 3D Printer
What is it
Desig..
$69.99
-29 %
Sold Out
Brand: PiBot
Model: PICOB230B01
Video1 Used for CNC (this video is old firmware, please check new)
Video2 Used for 3D Printer (this video is old firmware, please check new)
What is it
Designed for GRBL CNC and 3D printer.
It uses the USB port which is available on all modern computers and lapto..
$49.99 $69.99
-50 %
Sold Out
Brand: PiBot
Model: PIMDB230B01
What is it
MDRB is a 5 in 1 stepper driver module base board designed to use with popular A4988/DRV8825 or TMC2208 modules.
Configurations to each module are supported such as microstepping or input logic inverting.
Input logic level 3.3V and 5V compatible.
How it works
Application of MDRB ..
$9.99 $19.99
Brand: PiBot
Model: PIDRB220B01
Notice: Now The Products Have Upgrade to Rev2.3
Please go to the new version page - PiBot Stepper Motor Driver Rev2.3 (3.3V 5V or Dgnd logic max Output 4.12 - 4.5A))
All Order will ship with Rev2.3
What is it
A variety style signal supply logic input selectable, which compatible with lots..
$19.99
-50 %
Brand: PiBot
Model: PIDRB230B01
What is it
A variety style signal supply logic input selectable, which compatible with lots of MCU and other controller board, such as Mach3 USBCNC Raspberry Pi and so on.
Quick connector and Normal connector suitable for hobby and factory.
Wide power input DC 8 - 40V.
Signal supply lo..
$9.99 $19.99
-250x250.jpg "TMC2208 Stepper Motor Driver")
Brand: PiBot
Model: PITMC022N08
What is it
A variety style signal supply logic input selectable, which compatible with lots of MCU and other controller board, such as Mach3 USBCNC Raspberry Pi and so on.
Quick connector and Normal connector suitable for hobby and factory.
Wide power input DC 8 - 40V.
Signal supply lo..
$4.99
-550x550-250x250.jpg "TMC2225 Stepper Motor Driver")
Brand: PiBot
Model: PITMC022N25
What is it
A variety style signal supply logic input selectable, which compatible with lots of MCU and other controller board, such as Mach3 USBCNC Raspberry Pi and so on.
Quick connector and Normal connector suitable for hobby and factory.
Wide power input DC 8 - 40V.
Signal supply lo..
$4.99
-250x250.jpg "A4988 Stepper Motor Driver")
Brand: PiBot
Model: PIAAA049N88
What is it
A variety style signal supply logic input selectable, which compatible with lots of MCU and other controller board, such as Mach3 USBCNC Raspberry Pi and so on.
Quick connector and Normal connector suitable for hobby and factory.
Wide power input DC 8 - 40V.
Signal supply lo..
$1.39
-250x250.jpg "DRV8825 Stepper Motor Driver")
Brand: PiBot
Model: PIDRV088N25
What is it
A variety style signal supply logic input selectable, which compatible with lots of MCU and other controller board, such as Mach3 USBCNC Raspberry Pi and so on.
Quick connector and Normal connector suitable for hobby and factory.
Wide power input DC 8 - 40V.
Signal supply lo..
$1.69
Sold Out
Brand: PiBot
Model: PIELE010N12
Notice: Now The Products Have Upgrade to Rev2.3
Please go to the new version page - PiBot Controller Board Bluetooth Plugin A (Compatible Rev2.3)
All Order will ship with Rev2.3
What is it
HC-05 Bluetooth module support Master and Slave mode, modify by AT commander
Use the CSR mainstream bl..
$5.60
Brand: PiBot
Model: PILVV087N29
What is it
A variety style signal supply logic input selectable, which compatible with lots of MCU and other controller board, such as Mach3 USBCNC Raspberry Pi and so on.
Quick connector and Normal connector suitable for hobby and factory.
Wide power input DC 8 - 40V.
Signal supply lo..
$7.39
Brand: PiBot
Model: PIBTP023N01
What is it
HC-05 Bluetooth module support Master and Slave mode, modify by AT commander
Use the CSR mainstream bluetooth chip, bluetooth V2.0 protocol standards.
Module working voltage 3.3 V.
With LED indicator light, use 150mA and 3.3V regulation chip.
With Configure button, use AT Command Set..
$5.60
Brand: PiBot
Model: PIWFP023N01
What is it
HC-05 Bluetooth module support Master and Slave mode, modify by AT commander
Use the CSR mainstream bluetooth chip, bluetooth V2.0 protocol standards.
Module working voltage 3.3 V.
With LED indicator light, use 150mA and 3.3V regulation chip.
With Configure button, use AT Command Set..
$5.60
Brand: PiBot
Model: PILCD200B01
Notice: Now The Products Have Upgrade to Rev2.3
Please go to the new version page - PiBot LCD SD Controller Rev2.3 (4 × Keys with TF Card Reader)
All Order will ship with Rev2.3
What is it
Display Controller with 4 keys, LCD-2004 and a TF card reader,
Used for display the Printer status a..
$29.99
Brand: PiBot
Model: PILCD230B01
What is it
Display Controller with 4 keys, LCD-2004 and a TF card reader,
Used for display the Printer status and Print by the TF Card.
Display four rows, 20 characters per line LCD 2004.
Easy for put your brand or name in it by the PiBot Firmware.
How it works
Connect
Conect the lc..
$29.99
Brand: PiBot
Model: PIMEE100B01
Notice: Now The Products Have Upgrade to Rev2.3
Please go to the new version page - PiBot Mechanical Endstop Rev2.3 (Easy Assemble in Openbuilds V-Slot)
All Order will ship with Rev2.3
What is it
Based on ball bearing snap-action switch.
Used to find the datum point( such as x y z (0,0,0)..
$2.99
Brand: PiBot
Model: PIMES230B01
What is it
Based on ball bearing snap-action switch (PiBot directly designed and order from the factory).
Used to find the datum point( such as x y z (0,0,0)) or keep movement in intended range.
Suitable for 3D Printer and CNC or other motion controller board.
Apply to Joystick, TV game, Time re..
$2.99