Please make sure that we reply every mail, But need some time to deal.
Recruit the GRBL engineer for the adapter board for new GRBL firmware version, please email us.
×

For Hobby and Commercial

PiBot Nema17 Stepper Motor (1.65A 1.8° Low Noise and Calorific value 1100mm Cable)

Nema17 stepper motor - PiBot custom version
SKU: PIMOT010N01
Weight: 0.290kg

Availability: Out of stock

$13.99

Description

Details

What is it

The parameters designed by PiBot, in order to make the noise and calorific value low.

 pibot-nema17-stepper-motor

How it works

Connect to Stepper Motor Driver

Red---A1; Green--A2; Yellow--B1; Blue--B2.

Reverse: Black---A1; Green--A2; Red--B1; Blue--B2.

motor-to-driver

 

http://www.pibot.com/ben/pibot-stepper-driver-rev2-2/input-and-output.jpg

 

Specification

  • Step angle: 1.8°
  • Length: 40mm
  • Rated Votage: 2.4V
  • Rated Current: 1.65A
  • Phase Resistane: 1.5Ω
  • Phase Inductance: 2.7mH
  • Holding Torque: 3.5kg·cm
  • Lead Wire: 4
  • Wire Length: 1100mm
  • Rotor Inertia: 54g·cm²
  • Motor Weight: 0.29kg
  • Hole Diameter: 3mm
  • Mounter Hole: 31mm × 31mm

 

Shipping List

  • PiBot Nema17 Stepper Motor 1.65A 1.8° × 1

 

Shipping Notification

World Wide Shiping

  • DHL: 5 to 9 days
  • EUB: 10 to 30 days

Reviews

okReview by Gazsi
Quality
good stepper motors. The only problem I ran into was finding the pin-out. I ended up connecting an ohmmeter to find the two coils, and having to reverse the leads on one coil. Not hard, but I shouldn't have had to waste the time.
okReview by Bob
Quality
These motors had no trouble at all. I'll buy them for my next printer too.
Good buildReview by Denise
Quality
Good build, stable operation and a nice long cable. Installed on my Prusa and I've had no issues with it missing any steps.
okReview by Harold
Quality
installed 3 of them in my CNC (35cm×65cm) and they work flawless.
Shipping was fast and they were really well packed.:-D

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Tags

Tags

Use spaces to separate tags. Use single quotes (') for phrases.