Videos firmware is old, please check new
What is it
A set of electronics kits for 3D Printer.
Purpose of designed is easy to connected and used by Beginner, Developer, or Manufacturer.
Long cables with quick connector no need soldering.
With the multiple quick connector you can put the power cables of parallel connection together in one min.
The default 3D printer firmware is already in board (when you get the board use it for first test).
Easy Configure the parameters for your machine in "OnePageConfigure.h" in the folder of firmware before upload.
Use the PiBot version upload tool and software, building your 3D printer control system, no muss, no strange.
The set of electronics including:
- PiBot Controller Board Rev2.0 × 1
- PiBot Stepper Motor Driver Rev2.2 × 4
- PiBot LCD SD Controller Rev1.6 × 1
- 100k ohm NTC Thermister × 2
- PiBot Optical Endstop Rev1.6 × 3
- Endstop Cable for Controller Board Rev2.x × 3
- Stepper Motor Driver Signal Cable for Controller Board Rev2.x × 4
- Stepper Motor Driver Power Cable for Board Rev2.x × 4
- Multiple Quick Connector for Power Cables × 2
- USB Cable Blue 1.50m × 1
More information you can get from the related product page.
How it works
LCD SD Controller connect
Stepper Driver and Motor Connect
Endstop Cable Connect
Overview
May be you will need the other kits such as extruder and heatbed, Please see the related website.
Download the pdf -- https://www.pibot.com/ben/tutorials-connect-your-hardware-2-x/wiring-diagram-for-3d-printer.pdf
Related Tutorails and Downloads
--------------------------------------------------Downloads of 3D Printer Building
1，Repitier Fimware for PiBot Rev2.3
2，Marlin Firmware for PiBot Rev2.3
1，Repitier- Host
---------------------------------------------------Downloads of 2-Axis Laser and 3-Axis CNC Building
2-AXIS Laser and 3-Axis CNC Firmware
1，Grbl 1.1f for PiBot Rev2.3
- https://www.pibot.com/doc/GRBL-11f-PiBot-Rev23-V1.zip // (with .hex files in zip file)
- https://www.pibot.com/doc/grbl-11f-mega5x-basic-setting.zip // (run related .nc file on you first run in the sofware)
2-AXIS Laser and 3-Axis CNC Software
1，Laser: Grbl - Laser
2，CNC: openbuild - Controller
-----------------------------------------------------Downloads of 4-6Axis CNC Building
1，Grbl MEGA-5X 1.2e for PiBot Rev2.3
- https://www.pibot.com/doc/grbl-Mega-5X-edge-102e-PiBot-Rev23-V1.zip // (with .hex files in zip file)
- https://www.pibot.com/doc/grbl-11f-mega5x-basic-setting.zip // (run related .nc file on you first run in the sofware)
4-6Axis CNC Software
1，GRBL GNU:
2，Hot Wire Mega 5X:
-----------------------------------------------------Downloads of Robot Arm Control
RoBot Arm Firmware
1，Robot Arm V0.81 Firmware for PiBot Rev2.3
RoBot Arm software
2，Robot Arm 20sffactory
---------------------------------------------------- Downloads of Others
PiBot Controller Board USB Driver (Rev 1.4 1.6 2.0 2.3)
Arduino IDE Tools for Upload Firmware
Xloader Tool for Upload ".hex" Firmware
-------------------------------------------------------------------------------------------------
Specification
- Main Power Input: DC 12V - 30V (12V recommend)
- Main Power Input Fuse: 15A
- Heat bed Power Input Fuse: 20A
- Length of USB Cable: 1500mm
- Length of Endstop Signal Cable: 1500mm
- Length of Stepper Motor Driver Signal Cable: 500mm
- Length of Stepper Motor Driver Power Cable: 200mm
Figure Dimension
Shipping List
- PiBot Controller Board Rev2.0 × 1
- PiBot Stepper Motor Driver Rev2.2 × 4
- PiBot LCD SD Controller Rev1.6 × 1
- 100k ohm NTC Thermister × 2
- PiBot Optical Endstop Rev1.6 × 3
- Endstop Cable for Controller Board Rev2.x × 3
- Stepper Motor Driver Signal Cable for Controller Board Rev2.x × 4
- Stepper Motor Driver Power Cable for Board Rev2.x × 4
- Multiple Quick Connector for Power Cables × 2
- USB Cable Blue 1.50m × 1
