Menu
Your Cart

CNC Store

A Set of PiBot Electronics Kits 2.0C for CNC (Free Shipping by DHL) A Set of PiBot Electronics Kits 2.0C for CNC (Free Shipping by DHL)
New -21 % Pre-Order
Brand: PiBot Model: PIEKC200N01
Video   What is it A set of electronics kits for GRBL CNC. Purpose of designed is easy to connected and used by Beginner, Developer, or Manufacturer. Long cables with quick connector no need soliding. With the multiple quick connector you can put the power cables of parallel conneti..
$129.99 $164.99
Brand: PiBot Model: PIISR200B01
What is it This is a simple way to add a relay to your micro controller or CNC controller. It runs off 5V or 3.3V and most controllers can easily drive it. The circuit is optically isolated from the relay, so your controller is protected from voltage spikes and surges. It does this by shining lig..
$9.99
PiBot Controller Board Rev2.0 (CNC and 3D Printer 2 in 1) PiBot Controller Board Rev2.0 (CNC and 3D Printer 2 in 1)
New -14 % Sold Out
Brand: PiBot Model: PICOB200B01
Video1 Used for CNC   Video2 Used for 3D Printer   What is it Designed for GRBL CNC and 3D printer. link between your PC and your stepper driver drivers for stepper motors. It uses the USB port which is available on all modern computers and laptops. Purpose of design..
$59.99 $69.99
PiBot Stepper Motor Driver Rev2.2 (3.3V 5V logic max Output 4.12 - 4.5A) PiBot Stepper Motor Driver Rev2.2 (3.3V 5V logic max Output 4.12 - 4.5A)
New -35 %
Brand: PiBot Model: PIDRB220B01
What is it A variety style signal supply logic input selectable, which compatible with lots of MCU and other controller board, such as Mach3 USBCNC Raspberry Pi and so on. Quick connector and Normal connector suitable for hobby and factory. Wide power input DC 8 - 40V. Signal supply lo..
$12.99 $19.99
Brand: PiBot Model: PIMEE100B01
What is it Based on ball bearing snap-action switch. Used to find the datum point( such as x y z (0,0,0)) or keep movement in intended range. Suitable for 3D Printer and CNC or other motion controller board. Apply to Joystick, TV game, Time recorder, Air conditioner, Food processor, Juice maker,..
$2.99
Brand: PiBot Model: PIELE010N06
What is it Based on transmission type infrared sensor. Used to find the datum point( such as x y z (0,0,0)) or keep movement in intended range. Suitable for 3D Printer and CNC or other motion controller board.   How it works Connect Connect to the PiBot controller board via endstop cable..
$2.29
AC - DC Power Supply (12V 33A 400W)
New Sold Out
Brand: PiBot Model: PIELE010N21
What is it AC - DC Power Supply 12V 33A 400W   Select the proper input voltage   Specofication Input Voltage: AC220V or AC110V Output Voltage: DC12V and 0 ~ 33A Dimensions: 215mm × 115mm × 50mm     Shipping List AC - DC Power Supply 12V 33A ..
$35.00
Multiple Quick Connector for Power Cables (5 Ports) Multiple Quick Connector for Power Cables (5 Ports)
New Sold Out
Brand: PiBot Model: PIMUC200N01
What is it Used the Multiple Quick Connector put the power cables of parallel connection together, no need soliding.   How it works   Specofication Voltage Rating: AC 250V 32A Pin Number: 5 Connecting Wire Size: 0.08 - 2.5mmA²(13-28AWG) 0.08-4.0mmA²(11-28AWG) Tot..
$0.90
Endstop Cable for Controller Board Rev2.x (1500mm) Endstop Cable for Controller Board Rev2.x (1500mm)
New Sold Out
Brand: PiBot Model: PIENC200N01
What is it Used for connect the endstops to controller board, you may need 3 or 6.   How it works     Specification Length: 1500mm 3 pins × 3 pins   Shipping List Endstop Cable for Controller Board Rev2.x (1500mm) × 1..
$1.50
Stepper Motor Driver Power Cable for Board Rev2.x (200mm)
New Sold Out
Brand: PiBot Model: PIDPC200N01
What is it Signal Cable used in quick connector make you fast link between the controll board Rev2.0 and driver, or you can use a normal cable replace it by use the normal connector. Used the Multiple Quick Connector put the power cables of parallel connection together, no need soliding. The numb..
$0.50
Stepper Motor Driver Signal Cable for Controller Board Rev2.x (500mm)
New Sold Out
Brand: PiBot Model: PIDSC200N01
What is it Signal Cable used in quick connector make you fast link between the controll board Rev2.0 and driver, or you can use a normal cable replace it by use the normal connector. The number of your need depend on the number of driver your used.   How it works   Specification ..
$1.00
USB Cable Blue (1500mm)
New Sold Out
Brand: PiBot Model: PIELE016N05
What is it USB2.0 Standard Cable Using environmentally friendly material.  Using the standard of USB 2.0 connector, 24k gold-plated contacts,  99.99% oxygen-free copper wire and the data transfer rates up to 480Mb/s.  Twisted-pair data lines (impedance matching): Minimiz..
$4.50
PiBot Nema17 Stepper Motor (1.65A 1.8° Low Noise and Calorific value 1100mm Cable) PiBot Nema17 Stepper Motor (1.65A 1.8° Low Noise and Calorific value 1100mm Cable)
Sold Out
Brand: PiBot Model: PIMOT010N01
What is it The parameters designed by PiBot, in order to make the noise and calorific value low.   How it works Connect to Stepper Motor Driver Red---A1; Green--A2; Yellow--B1; Blue--B2. Reverse: Black---A1; Green--A2; Red--B1; Blue--B2.     Specification ..
$13.99
Showing 1 to 13 of 13 (1 Pages)
Notification Module
Hello, Dear EveryBody: in 2020 ! Now the Products are gradually in Stock,Thanks for all of yours Support!!!