Brand: PiBot
Model: PICOB490B01
The 2025 Lastest Version is V4.9 Plus B Now in Stock!2024 V4.9P upgrade to 2025 V4.9PB, Compared to the V4.9P version from 2024, V4.9PB have incorporated a voltage level selection function, allowing users to choose either 3.3V or 5V as the onboard drviers control voltage.We have fixed some pin ..
$49.99 $79.99
Ex Tax:$49.99
Brand: PiBot
Model: PICOB480B01
V4.9 Plus Now in order!Thanks for everyone,The V4.8 have all sold outWe have upgraded the board to V4.9 PLUS make it more esay connnecturl:https://www.pibot.com/cnc-laser-electronics/pibot-fluidnc-grbl-cnc-controller-v4-9order V4.6 V4.8 You will get the new board is V4.9 PLUS V4.9 PlusThe ..
$59.99 $79.99
Ex Tax:$59.99
Brand: PiBot
Model: PICOB470B01
Now in Order!Now All Order Products have tested Ready to ship.Notice: The 4.7A silk screen some wrong, The gpio.13 and gpio.14 need exchangeWhat is it
This was designed to control a wide variety of CNC machines. It can control 6 motors and many spindle and laser types. It is very easy to configure...
$29.99 $59.99
Ex Tax:$29.99
Brand: PiBot
Model: PIDRB230B01
What is it
A variety style signal supply logic input selectable, which compatible with lots of MCU and other controller board, such as Mach3 USBCNC Raspberry Pi and so on.
Quick connector and Normal connector suitable for hobby and factory.
Wide power input DC 8 - 40V.
Signal supply lo..
$5.99 $19.99
Ex Tax:$5.99
Brand: PiBot
Model: PIIRB230B01
What is it
This is a simple way to add a relay to your micro controller or CNC controller. It runs off 5V or 3.3V and most controllers can easily drive it.
The circuit is optically isolated from the relay, so your controller is protected from voltage spikes and surges.
It does this by shining lig..
$9.99
Ex Tax:$9.99
Brand: PiBot
Model: PIANT040B01
What is it
USE FOR https://www.pibot.com/cnc-laser-electronics/pibot-fluidnc-grbl-cnc-controller-v4-9
How it works
Connect1. Only 1 or 2 can be selected, one at a time, connected with a 0 ohm resistor.2. Option 1 is the onboard antenna mode (default)3. Choose 2 as IPEX external antenna
Spec..
$1.99 $2.99
Ex Tax:$1.99
Brand: PiBot
Model: PILCD040B01
What is it
# Begin OLEDi2c0: sda_pin: gpio.27 scl_pin: gpio.25oled: i2c_num: 0 i2c_address: 60 width: 128 height: 64 radio_delay_ms: 1000
How it works
Connect
Specofication
Length of Dupont Line: 100..
$4.99 $5.99
Ex Tax:$4.99
Brand: PiBot
Model: PIBOX040B01
What is itV4.9p URL: https://www.pibot.com/cnc-laser-electronics/pibot-fluidnc-grbl-cnc-controller-v4-9
Specofication
Size: 150mm × 90mm × 40mm
Hole Diameter: 3.5mm
Shipping List
PiBot Electronic Box V4 × 1..
$9.99 $10.99
Ex Tax:$9.99
Brand: PiBot
Model: PIMES400B01
What is it
PiBot Mechanical Endstop V4 x 3
Shipping List
PiBot Mechanical Endstop V4 x 3..
$1.29
Ex Tax:$1.29
Brand: PiBot
Model: PIPWC002N00
What is it
Signal Cable used in quick connector make you fast link between the controll board Rev2.0 and driver, or you can use a normal cable replace it by use the normal connector.
Used the Multiple Quick Connector put the power cables of parallel connection together, no need soliding.
The numb..
$0.50
Ex Tax:$0.50
Brand: PiBot
Model: PIMTC001N01
How it works
Specofication
Length: 100mm
xh2.54 - 4Pins
Shipping List
Stepper Motor Cable for Board Rev2.x (100mm) × 3..
$1.49
Ex Tax:$1.49
Brand: PiBot
Model: PICOB460B01
Now Upgrade to V4.8A!Click here to go to V4.8A link: https://www.pibot.com/pibot-fluidnc-grbl-cnc-controller-v4-8This Rev4.6 will stop update, please go to the V4.8A page.--------------------------------------------------We have upgraded the board to V4.8A make it safer and more functional, suc..
$59.99 $79.99
Ex Tax:$59.99
Showing 1 to 12 of 12 (1 Pages)