PiBot LCD SD Controller Rev1.6

What is it

Display Controller with 4 keys, LCD-2004 and a TF card reader,

Used for display the Printer status and Print by the TF Card.

Display four rows, 20 characters per line LCD 2004.

Easy for put your brand or name in it by the PiBot Firmware.

How it works

Connect

Conect the lcd 2004 to keys board via dupont line.

Connect to the mother controller board via display controller cable.

Firmware Configure

More detail please check the tutorails - "Configure Your Firmware".

The words Display In LCD, put your machine name in this, but not too long

• UI_PRINTER_NAME “PiBot3DPrinter”

• UI_PRINTER_COMPANY "BanDao"

• DispReady "PiBot ready"

• DispIdel "PiBot idel"

Overview

You can assemble to you machine like this way or design the panel by yourself.

Specofication

• Length of Dupont Line: 100 mm 

• Length of Lcd Display Controller Cable: 500 mm

• Size of Key Board: 63.8mm × 54.2mm

• Size of Lcd 2004: 100mm × 60mm × 10mm

• Hole Diameter: 3mm

• Mounter Hole: 56.9mm × 38.2mm

Documents

Development Documents - PiBot LCD Display Controller Rev 1.4 or 1.6

STL DXF Files of Panel

Tutorails - Hardware Firmware Software

Shipping List

• LCD 2004 × 1

• Keys Board × 1

• LCD Display Controller Cable × 1

• Dupont Line × 1