-25%
Brand: PiBot
Model: PICOB480B01
V4.9 Plus Now in order!Thanks for everyone，The V4.8 have all sold outWe have upgraded the board to V4.9 PLUS make it more esay connnecturl：https://www.pibot.com/cnc-laser-electronics/pibot-fluidnc-grbl-cnc-controller-v4-9order V4.6 V4.8 You will get the new board is V4.9 PLUS V4.9 PlusThe ..
$59.99 $79.99
Ex Tax:$59.99
-70%
Sold Out
Brand: PiBot
Model: PIDRB230B01
What is it
A variety style signal supply logic input selectable, which compatible with lots of MCU and other controller board, such as Mach3 USBCNC Raspberry Pi and so on.
Quick connector and Normal connector suitable for hobby and factory.
Wide power input DC 8 - 40V.
Signal supply lo..
$5.99 $19.99
Ex Tax:$5.99
-27%
Sold Out
Brand: PiBot
Model: PIEKC230N01
Video firmware is old , please check new
What is it
A set of electronics kits for GRBL CNC.
Purpose of designed is easy to connected and used by Beginner, Developer, or Manufacturer.
Long cables with quick connector no need soliding.
With the multiple quick connector you can put t..
$119.99 $164.99
Ex Tax:$119.99
-33%
Sold Out
Brand: PiBot
Model: PIEKD230N01
Videos(this video is old firmware, please check new)
What is it
A set of electronics kits for 3D Printer.
Purpose of designed is easy to connected and used by Beginner, Developer, or Manufacturer.
Long cables with quick connector no need soldering.
With the multiple quick connecto..
$139.99 $209.99
Ex Tax:$139.99
-29%
Sold Out
Brand: PiBot
Model: PICOB230B01
Video1 Used for CNC (this video is old firmware, please check new)
Video2 Used for 3D Printer (this video is old firmware, please check new)
What is it
Designed for GRBL CNC and 3D printer.
It uses the USB port which is available on all modern computers and lapto..
$49.99 $69.99
Ex Tax:$49.99
-50%
Sold Out
Brand: PiBot
Model: PIMDB230B01
What is it
MDRB is a 5 in 1 stepper driver module base board designed to use with popular A4988/DRV8825 or TMC2208 modules.
Configurations to each module are supported such as microstepping or input logic inverting.
Input logic level 3.3V and 5V compatible.
How it works
Application of MDRB ..
$9.99 $19.99
Ex Tax:$9.99
-31%
Brand: PiBot
Model: PICOB490B01
What is New
Thank you for your support. The V4.9PB version is now sold out. We have currently updated to the 4.96 Pro version, which is compatible with V4.9PB. We have implemented numerous optimizations and upgrades, such as adopting a four-layer PCB design, optimizing SPI signals, adding 22 LED ..
$54.99 $79.99
Ex Tax:$54.99
-53%
Brand: PiBot
Model: PICOB470B01
In Order! READY TO SHIPWe change the connector for xh2.54 and ph2.0 from 4.7a, BUT NOW IS ONLY $27.99 What is itThis controller is designed to operate a wide range of CNC machines. It can drive six motors and supports various spindles and lasers—including those with PWM, 485, and 0-10V outputs ..
$27.99 $59.99
Ex Tax:$27.99
-30%
Brand: PiBot
Model: PIDRB400B01
What is itThis product is specifically designed for broad compatibility with various CNC control boards, supporting not only our company's V4.7 and V4.9PB versions but also FluidNC 6X series. It supports standard stepper motor signals (en, dir, clk) and features an SPI communication interface. We ha..
$13.99 $19.99
Ex Tax:$13.99
-0%
Brand: PiBot
Model: PIIRB400B01
What is it
This is a simple way to add a relay to your micro controller or CNC controller. power range from 4.5V to 40V
The circuit is optically isolated from the relay, so your controller is protected from voltage spikes and surges.
It does this by shining light across a gap to a sensor. No elec..
$9.98 $9.99
Ex Tax:$9.98
-20%
Brand: PiBot
Model: PIESP320D01
What is it
The ESP32 USB Type-C DevKitC V4 is a versatile development board based on the powerful ESP32-WROOM-32 or ESP32-WROVER module (varies by model). Designed for IoT prototyping and embedded applications, it features a USB Type-C connector for easy prog..
$7.99 $9.99
Ex Tax:$7.99
-20%
Brand: PiBot
Model: PIPDT400B01
Package Contents:1. Pendant V4 Main unit × 1 2. Bluetooth TX RX module × 2 3. Bluetooth-to-mainboard adapter module × 1 4. RJ12 module × 1 5. RJ12 communication cable (1m) × 1 --------------------------------------------Battery: Flat-top 18650 ,..
$79.99 $99.99
Ex Tax:$79.99
-17%
Brand: PiBot
Model: PILCD040B01
What is it
# Begin OLEDi2c0: sda_pin: gpio.27 scl_pin: gpio.25oled: i2c_num: 0 i2c_address: 60 width: 128 height: 64 radio_delay_ms: 1000
How it works
Connect
Specofication
Length of Dupont Line: 100..
$4.99 $5.99
Ex Tax:$4.99
New
-6%
Brand: PiBot
Model: PISTM040B01
What is it
The main function of this board is to expand multiple I/O ports for input and output, solving the problem of insufficient I/O ports on the ESP32.There is an comprehensive in FluidNC wiki page that tells you how to use each feature. You should probably read it.But In there PiBot..
$29.99 $32.00
Ex Tax:$29.99
New
-40%
Brand: PiBot
Model: PIRJM012B01
What is it
Many pendants and displays for FluidNC such as the FluidDial connect via RJ12 cables. This module allows for easy connection to 6 Pack and 6x controllers. The module circuit includes suppression diodes and series resistors to help protect the controller and pendant or display.A. RJ12 Wir..
$5.99 $9.99
Ex Tax:$5.99
New
-40%
Brand: PiBot
Model: PIBTB001B01
What is it
PiBot FluidNC Bluetooth Module for Pendant V4..
$5.99 $9.99
Ex Tax:$5.99
New
-13%
Brand: PiBot
Model: PIPBT002B02
What is itBluetooth Modules x 2What is itA Pair of Bluetooth Transceiver ModulesHow to useConnect：Step 1: Connect via USB-to-serial moduleStep 2: Open serial terminal softwareStep 3: Select the correct COM port and connectPair **1. Take out one module, query and record its MAC address.** &..
$6.99 $7.99
Ex Tax:$6.99
New
-14%
Brand: PiBot
Model: PIUTU001B01
What is it
USB-C to Serial Debug ModuleHow to useConnect：Step 1: Connect via USB-to-serial moduleStep 2: Open serial terminal softwareStep 3: Select the correct COM port and connectPair **1. Take out one module, query and record its MAC address.** **Use command:** `AT+M..
$5.99 $6.99
Ex Tax:$5.99
New
-50%
Brand: PiBot
Model: PIRJC012B01
What is it
RJ12 Pure Copper Multi-Strand 6-Conductor Flat Cable1M..
$1.99 $3.99
Ex Tax:$1.99
-44%
Brand: PiBot
Model: PIMES400B03
What is it
PiBot Mechanical Endstop V4 x 3
Shipping List
PiBot Mechanical Endstop V4 x 3..
$2.39 $4.29
Ex Tax:$2.39
New
-54%
Sold Out
Brand: PiBot
Model: PIMES400B01
What is it
Based on ball bearing snap-action switch (PiBot directly designed and order from the factory).
Used to find the datum point( such as x y z (0,0,0)) or keep movement in intended range.
Suitable for 3D Printer and CNC or other motion controller board.
Apply to Joystick, TV game, Time re..
$1.39 $2.99
Ex Tax:$1.39
New
-52%
Brand: PiBot
Model: PIOES400B01
What is it
Based on transmission type infrared sensor.
Used to find the datum point( such as x y z (0,0,0)) or keep movement in intended range.
Suitable for 3D Printer and CNC or other motion controller board.
How it works
Connect
Specification
Size of Endstop Board: 36mm x 15mm
..
$1.11 $2.29
Ex Tax:$1.11
New
-60%
Brand: PiBot
Model: PIRES400B01
What is it
Non-touch endstop.
Based on infrared sensor with two fix holes spaced 20mm.
Used to find the datum point( such as x y z (0,0,0)) or keep movement in intended range.
Can be used to supprot non-contact automatic adjustment function of building platform.
Fine-tuning distance.
Trigger b..
$1.99 $4.99
Ex Tax:$1.99
%20(1)-250x250h.png "PiBot Electronic Box V4")
-250x250h.png "PiBot Electronic Box V4")
-9%
Brand: PiBot
Model: PIBOX040B01
What is itV4.9p URL: https://www.pibot.com/cnc-laser-electronics/pibot-fluidnc-grbl-cnc-controller-v4-9
Specification
Size: 150mm × 90mm × 40mm
Hole Diameter: 3.5mm
Shipping List
PiBot Electronic Box V4 × 1..
$9.99 $10.99
Ex Tax:$9.99
New
-25%
Brand: PiBot
Model: PITMC022N09
What is it
Shipping List
TMC2209 × 1Heatsink x 1..
$5.99 $7.99
Ex Tax:$5.99