Menu
Your Cart

Electronic

Laser Engraver Electronic

A Set of PiBot Electronics Kits 2.3L for Laser Engraver A Set of PiBot Electronics Kits 2.3L for Laser Engraver
Sold Out
Brand: PiBot Model: PIEKL230N01
Video   What is it A set of electronics kits for GRBL CNC. Purpose of designed is easy to connected and used by Beginner, Developer, or Manufacturer. Long cables with quick connector no need soliding. With the multiple quick connector you can put the power cables of parallel conneti..
$131.94
Ex Tax:$131.94
A Set of PiBot Electronics Kits 2.3LM for Laser Engraver  - Multi-Driver Board Version A Set of PiBot Electronics Kits 2.3LM for Laser Engraver  - Multi-Driver Board Version
Sold Out
Brand: PiBot Model: PIEKL230N02
Video firmware is old, please check new!   What is it A set of electronics kits for GRBL CNC. Purpose of designed is easy to connected and used by Beginner, Developer, or Manufacturer. Long cables with quick connector no need soliding. With the multiple quick connector you can put t..
$111.45
Ex Tax:$111.45
PiBot Isolated Relay Board Rev2.3 (Upgrade to Unique Safe Design) PiBot Isolated Relay Board Rev2.3 (Upgrade to Unique Safe Design)
-20 %
Brand: PiBot Model: PIIRB230B01
What is it This is a simple way to add a relay to your micro controller or CNC controller. It runs off 5V or 3.3V and most controllers can easily drive it. The circuit is optically isolated from the relay, so your controller is protected from voltage spikes and surges. It does this by shining lig..
$7.99 $9.99
Ex Tax:$7.99
PiBot Multi-Stepper Motor Driver Board Rev2.3 (Compatible with A4988 DRV8825 TMC2208) PiBot Multi-Stepper Motor Driver Board Rev2.3 (Compatible with A4988 DRV8825 TMC2208)
-50 % Sold Out
Brand: PiBot Model: PIMDB230B01
What is it MDRB is a 5 in 1 stepper driver module base board designed to use with popular A4988/DRV8825 or TMC2208 modules. Configurations to each module are supported such as microstepping or input logic inverting. Input logic level 3.3V and 5V compatible. How it works Application of MDRB ..
$9.99 $19.99
Ex Tax:$9.99
Brand: PiBot Model: PITMC022N08
What is it 3D Printer Stepper Motor DriverMC2208 V1.2 is an ultra-quiet two-phase stepper motor drive chipcontinuous drive current 1.4Apeak current 2Avoltage range 4.75V-36V256 subdivisionThe flexible microPlyer interpolation unit provides up to 256 subdivisions, allowing perfect sinusoidal control..
$3.99
Ex Tax:$3.99
Brand: PiBot Model: PITMC022N25
What is it Logic Voltage : 3.3V-5V1SET include : 1pc TMC2225 Driver, 1PC Heat sinkFeature 1 : tmc2225 driverFeature 2 : motor driver moduleFeature 3 : Replace tmc2208/ tmc2209 Shipping List TMC2225 × 1..
$3.99
Ex Tax:$3.99
Brand: PiBot Model: PIAAA049N88
What is it Parameters:Size: 1.5mmX2mm (for RAMPS, ultimaker or other compatible boards);The drive current: 2A (best to install the heat sink)Segments: 1,1 / 2,1 / 4,1 / 8,1 / 16Manufacturing process: higher SMT placement machine manufacturing, non-manual welding, yield, more stable performance.Appl..
$1.39
Ex Tax:$1.39
Brand: PiBot Model: PIDRV088N25
What is it Description:The DRV8825 stepper motor driver carrier is a breakout board for DRV8825 microstepping bipolar stepper motor driver. The module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver board, so it can be used as a higher-performance dro..
$1.69
Ex Tax:$1.69
Brand: PiBot Model: PILVV087N29
What is it Dimensions: 1.5mm * 2.0mm (Same with the A4988 and DRV8825)Maximum drive current: 1.5A (Default 0.8A)Operating voltage: 6V-36V, the proposed voltage is 12VSupport subdivisions: 1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128Product Process: four layer PCB boardIn the 64 subdivision or 128 subd..
$7.39
Ex Tax:$7.39
Brand: PiBot Model: PIWFP023N01
What is it HC-05 Bluetooth module support Master and Slave mode, modify by AT commander Use the CSR mainstream bluetooth chip, bluetooth V2.0 protocol standards. Module working voltage 3.3 V. With LED indicator light, use 150mA and 3.3V regulation chip. With Configure button, use AT Command Set..
$5.60
Ex Tax:$5.60
Brand: PiBot Model: PIMES230B01
What is it Based on ball bearing snap-action switch (PiBot directly designed and order from the factory). Used to find the datum point( such as x y z (0,0,0)) or keep movement in intended range. Suitable for 3D Printer and CNC or other motion controller board. Apply to Joystick, TV game, Time re..
$2.99
Ex Tax:$2.99
Brand: PiBot Model: PIOES230B01
What is it Based on transmission type infrared sensor. Used to find the datum point( such as x y z (0,0,0)) or keep movement in intended range. Suitable for 3D Printer and CNC or other motion controller board.   How it works Connect Connect to the PiBot controller board via endstop cable..
$2.29
Ex Tax:$2.29
Brand: PiBot Model: PIESC010N00
What is it Used for connect the endstops to controller board, you may need 3 or 6.   How it works     Specification Length: 1000mm 3 pins × 3 pins   Shipping List Endstop Cable for Controller Board Rev2.x (1000mm) × 1..
$1.50
Ex Tax:$1.50
Brand: PiBot Model: PIPWC002N00
What is it Signal Cable used in quick connector make you fast link between the controll board Rev2.0 and driver, or you can use a normal cable replace it by use the normal connector. Used the Multiple Quick Connector put the power cables of parallel connection together, no need soliding. The numb..
$0.50
Ex Tax:$0.50
Brand: PiBot Model: PIMTC001N00
How it works Specofication Length: 100mm 4Pins   Shipping List Stepper Motor Cable for Board Rev2.x (100mm) × 1..
$0.50
Ex Tax:$0.50
Brand: PiBot Model: PISGC003N00
What is it Signal Cable used in quick connector make you fast link between the controll board Rev2.0 and driver, or you can use a normal cable replace it by use the normal connector. The number of your need depend on the number of driver your used.   How it works   Specification ..
$1.00
Ex Tax:$1.00
Brand: PiBot Model: PIUSC010N00
What is it USB2.0 Standard Cable Using environmentally friendly material.  Using the standard of USB 2.0 connector, 24k gold-plated contacts,  99.99% oxygen-free copper wire and the data transfer rates up to 480Mb/s.  Twisted-pair data lines (impedance matching): Minimiz..
$4.50
Ex Tax:$4.50
Showing 1 to 17 of 17 (1 Pages)