Z-probing Auto leveling Building Bed Video
What is it
Non-touch endstop.
Based on infrared sensor with two fix holes spaced 20mm.
Used to find the datum point( such as x y z (0,0,0)) or keep movement in intended range.
Can be used to supprot non-contact automatic adjustment function of building platform.
Fine-tuning distance.
Trigger by +5V or GND.
How it works
Connect
Connect to the mother controller board via endstop cable
Firmware Configure
More detail please check the tutorials - "Configure Your Firmware".
Set the following 5 parameters：
- Probing point1（near the park position）
- Probing point2
- Probing point3
- Distance of senser and extruder in X axis
- Distance of senser and extruder in Y axis
Overview
Assembly for machine.
Assembly for probing.
Related Tutorails
Specification
- Length of Reflection Endstop Cable: 600mm
- Size of Endstop Board: 40mm × 25mm
- Hole Diameter: 3mm
- Mounter: 18mm
Shipping List
- Reflection Endstop Board × 1
-250x250.jpg "TMC2208 Stepper Motor Driver")
-550x550-250x250.jpg "TMC2225 Stepper Motor Driver")